Tips For Replacing a Window Handle
Switching the handle on your window is a simple task that can be completed in the at-home comforts of your home. Use these helpful tips to ensure a smooth operation and great look.
Begin by removing basildon door handle repair to reveal the screws within the uPVC window handle. Measure the spindle's length to ensure you get the correct size replacement.
1. Measure the Spindle length
It is essential to get the spindle size right when replacing windows handles. It can affect the tightness or elasticity of the handle and whether the handle will lock properly into the window frame. The spindle is the metal shaft that connects the handle and to the lock within the window frame. The spindle can be found in the standard 8mm cross-section for industry or the more traditional versions that measure 9mm. Modern industry standards are 8mm, however it wasn't always that way. It is essential to confirm the measurements before buying the handle you want to purchase.
Remove the handle. This can be done easily by turning the handle to the open position and unwinding two screws that keep the handle in place (which are often hidden behind plastic caps that will need to removed). Once the handle has been removed, measure the distance from the base to the point at which it ends. This will give you the measurements needed to purchase a replacement.
There are many options when it comes to choosing a new window handle, from sleek chrome that blends into modern homes to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more traditional Tudor cottages with curled monkey tail locks! There are a lot of options, but the most important thing is to pick one that complements your home's style.
Espag handles are typically used to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles range between 58mm and 62mm, but luckily there are replacements available for both sizes. Cadenza window handles have a different size as they feature an angle blade that operates a multi-point lock mechanism inside the window.
When you are choosing a handle for your window, you should also consider the hand you use to open your door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.
2. Remove the Handle
A window handle that falls out can be a hassle, regardless of whether the handle is damaged or worn out. However, the good part is that replacing a uPVC window handle is a straightforward task that you can complete yourself. All you need is some basic tools and some time to complete the process.
You must first open the window, and ensure that it is not locked. The next step is to remove the screw caps that hold the handle in place. Once these are removed, you are able to work on removing the handle itself.
The handle is attached to a spindle within the window frame. Depending on the kind it is secured with a screw or pin. The most commonly used types of handles are inline Espagnolette handles and the cockspur handles. Both these types of handles are employed on casement windows, including aluminum windows. They can be locked using keys to prevent the opening of the window from outside or you can lock them by turning the handle clockwise.
To remove the handle you will need to use an screwdriver with a flat blade in order to release the clip holding the handle. Once this is released, the handle will fall off the spindle. Once the old handle is removed, you will be required to measure the length of the spindle and ensure that your new handle is compatible with this measurement.
Once you have the proper size, you can screw the new handle in place. It is essential to make sure that the handle is properly attached and rotates in the proper direction (clockwise when the handle is open and counterclockwise if handle is closed). It is also crucial to ensure that it isn't fitted upside down.
In the end, you must replace the screw cap caps. After you've done this then you can test the handle to ensure that it is working correctly. Also, you should test the locking mechanism by moving the handle from the locked position and then back to the locked position.
3. Remove the Screws
A uPVC window handle is an essential element of any home and is often the first thing to begin to show signs of wear and wear and tear or damage. It can be caused by natural factors or through regular use, or malicious damage caused by opportunistic criminals who want to open a closed window and gain entry to your home. A simple fix can resolve the issue and stop it from occurring again.
UPVC handles can also be difficult to remove if the locking mechanisms are not working properly. It's often possible to solve the problem by replacing the multipoint locking mechanism rather than the entire handle. This could save you money.
After you've removed the old handle, you will need to take off the screws that were holding it in place. They're usually on the inside face of the base of the handle. It could be necessary to use a screwdriver to do this. Be careful not to over tighten the handle since this could cause it to loosen.
You will then need to locate the fixing pins or screws that hold the new handle in the correct position. They're usually on the inside of the base of the handle. You'll need a screwdriver to remove them. If you wish to replace them, you can do so by replacing the caps on the screws and check the handle to ensure it functions correctly.
If you're ready to put in the new handle, simply align the spindle with the cut out in the window mechanism and screw in the right position. If you want to replace the screws, make sure the handle is in an open position and that the screws are securely fixed. Once this is complete you're all done and you can enjoy your newly replaced window handle. This should help you avoid costly window and door replacements in the future. If you'd like to get assistance regarding this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Fit the New Handle
The procedure of replacing a damaged window handle or updating it is simple and can be completed within just a few steps. The most important thing is to identify the kind of handle, take measurements of its spindle and know what tools you will need to complete the job. Safety is always the first priority when working with tools and windows. Be sure to follow the steps and ensure that you have a handle that is safe for use.
The first step is to locate the screws that hold your current window handle in place and take them out, while maintaining an appropriate grip on the handle itself to prevent it from falling suddenly and result in injury. After the screws have been removed, you can put them in a safe place to be replaced later.
After removing the old handle, you can begin installing your new handle. The handle needs to be perfectly positioned to function properly and hold the window in its closed position. The next step is to slide the square metal bar to the back of the handle into the hole of the window mechanism, making sure it fits securely.
Now that your new handle is in place, the final thing to do is to replace the screw caps and check to see if it works. If you are not satisfied with the results or the window doesn't open and close properly, call our experts for assistance.
Most UK homes have uPVC Windows. As such, many will require replacement at some point because of wear and tear or breakage. The procedure is fairly simple and can be done by anyone with a little knowledge of DIY. The most crucial aspect to the success of the process is to ensure that you're using a handle that matches the existing window in terms of dimensions and style. If you're not sure what type of handle you require, please get in touch with our team who can help you navigate the various choices available.